1-3 ημέρες
Gigabit Power over Ethernet (PoE) Injector
42.78€
57.04€
Description
The Gigabit Power over Ethernet Injector, model TPE-113GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet (PoE) signal.
Connect this device to a non-PoE switch and then run an Ethernet cable for up to 100 meters (328 Ft.) to network PoE devices.
No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations.
This compact device safeguards valuable network equipment with short circuit protection.
Quickly create an integrated PoE and non-PoE network at Gigabit speeds.
| Specifications | |
| Standards | IEEE 802.3 |
| IEEE 802.3u | |
| IEEE 802.3ab | |
| IEEE 802.3af | |
| Device Interface | 1 x Gigabit Data In port |
| 1 x Gigabit Data & Power out port | |
| 1 x Power Input | |
| LED indicator | |
| Special Features | Wall-mountable |
| Data Transfer Rate | Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) |
| Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) | |
| Gigabit: 2000Mbps (full duplex) | |
| PoE Delivery | Pin 1, 2 for power+ and pin 3, 6 for power- (mode A) |
| Power | Input: 100 – 240V AC, 50/60Hz, 0.6A max. |
| Power Consumption | Max. 15.4W |
| Operating Temperature | 0° – 40° C (32° – 104° F) |
| Operating Humidity | Max. 90% non-condensing |
| Dimensions | 67 x 51 x 25mm (2.6 x 2 x 1 in.) |
| Weight | 38g (1.34 oz.) |
| Certifications | CE |
| FCC | |
, 759.82 kb)